ESD & Cleanroom Garment Laundry Service in Israel
Evaluating an ESD Laundry Supplier, Backup Provider or Pilot?
Maayan Laundry provides recurring laundry services for ESD garments, anti-static workwear and reusable garments used in controlled production environments across Israel.
The service is built around the actual garment specification, manufacturer care instructions, weekly volume, sorting and packing requirements, and the factory's QA procedures.
You do not need to move your entire garment program to a new supplier from day one.
Factories can begin with a defined pilot, a limited garment quantity, or evaluate Maayan as a backup laundry provider alongside an existing supplier.
This allows Operations, Procurement and QA teams to evaluate the actual service process before deciding whether to establish a recurring laundry cycle.
To Review Service Fit, Send Us:
-
garment type, model or photograph
-
approximate weekly quantity
-
factory location
-
required collection and return frequency
-
sorting requirements
-
packing requirements
-
manufacturer care instructions, if available
-
relevant QA or ESD requirements
We will review the information and determine whether the garments and required service cycle are suitable for our operation.
Where there is a fit, we can define a pilot covering the garment quantity, laundering process, collection and return schedule, sorting, packing and evaluation points.
Maayan – Professional Textile Care Since 1997
Phone: 1-700-70-10-50
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
Prefer to Send the Specification by Email?
This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
ESD Garment Laundry for Electronics and Precision Manufacturing
Electrostatic discharge can damage sensitive electronic components, assemblies and devices.
For this reason, many electronics manufacturers operate designated Electrostatic Protected Areas (EPA) and use static-control garments as part of their overall ESD control program.
ESD coats and garments may contain conductive or dissipative fibers or other static-control elements. Because of this construction, they should not automatically be treated like ordinary workwear.
The laundering process must consider factors such as:
-
garment construction
-
fabric composition
-
conductive or dissipative components
-
manufacturer's washing instructions
-
permitted washing temperature
-
permitted drying temperature
-
detergent restrictions
-
use restrictions for bleach or fabric softeners
-
maximum or recommended laundering cycles, when specified
-
customer QA requirements
-
garment inspection and rejection criteria
At Maayan Laundry, we define the laundry process around the garment specification rather than forcing every ESD garment into one standard washing program.
What Types of ESD Garments Can Be Laundered?
Depending on the manufacturer's instructions and the customer's requirements, the service may include:
-
ESD lab coats
-
anti-static coats
-
ESD smocks
-
static-control jackets
-
ESD coveralls
-
reusable anti-static workwear
-
garments used in EPA areas
-
garments containing conductive grid fibers
-
reusable garments used in electronics production
-
specialized garments used in medical-device or precision manufacturing
-
other reusable static-control textile items, following review
Different garment models can have very different care requirements.
For this reason, the words "ESD garment" alone are not sufficient to determine a laundering process. Before routine service begins, we prefer to review the actual garment label, manufacturer documentation or the customer's existing work instruction.
Why ESD Garments Require a Defined Laundry Process
The purpose of laundering an ESD garment is not only to remove visible dirt.
The garment needs to return to the factory in a condition suitable for its intended use while avoiding unnecessary treatment that could shorten garment life or conflict with its static-control design.
Incorrect treatment may potentially affect:
-
conductive fibers
-
dissipative elements
-
fabric structure
-
cuffs and closures
-
seams
-
garment dimensions
-
surface contamination
-
electrical performance over the life of the garment
For that reason, a professional ESD garment laundry program should be based on repeatability and documented requirements.
The objective is not to make assumptions.
The objective is to know:
what garment is being processed, how it should be processed, how it should be returned and what the customer expects from every service cycle.
Our ESD Garment Laundry Process
1. Garment and Specification Review
Before establishing a regular service program, we review the relevant garment information.
We may request:
-
garment photographs
-
manufacturer and model
-
fabric composition
-
care label
-
manufacturer's laundry instructions
-
permitted wash temperature
-
permitted drying conditions
-
restricted chemicals
-
customer ESD requirements
-
QA work instructions
-
packing requirements
-
expected weekly volume
If the factory already has an approved garment-care procedure, it can serve as the basis for defining the laundry process.
2. Receiving, Counting and Sorting
Garments are received and sorted according to the service specification agreed with the customer.
Depending on operational requirements, sorting can be defined by:
-
garment type
-
size
-
department
-
production area
-
employee group
-
normal versus stain-treatment items
-
damaged or exceptional garments
-
other customer-defined categories
For larger industrial programs, correct sorting is just as important as washing.
The customer needs the right garments to return in the right format so they can re-enter the factory's garment-distribution process efficiently.
3. Washing According to Garment Requirements
The washing program is selected according to the garment and the agreed specification.
Relevant variables may include:
-
water temperature
-
detergent type
-
washing duration
-
mechanical action
-
rinse requirements
-
chemical restrictions
-
manufacturer's care instructions
We do not assume that one temperature or one detergent is suitable for every ESD garment.
Static-control garments from different manufacturers may have different requirements, and the customer's own ESD program may impose additional limitations.
The defined process is therefore based on the garment that is actually being serviced.
4. Stain Treatment for ESD Garments
Industrial garments may accumulate:
-
body oils
-
collar and cuff contamination
-
food stains
-
production-related dirt
-
biological stains
-
other local contamination
However, an ESD garment should not automatically be exposed to a stronger chemical simply because a stain is difficult to remove.
Where stain treatment is required, the treatment must remain compatible with the garment and its care instructions.
A service program can therefore distinguish between:
standard garments
and
garments requiring additional stain pre-treatment or exceptional handling.
This also allows the customer to understand where additional treatment is required rather than applying an unnecessarily aggressive process to every garment.
5. Complete and Controlled Drying
Drying is a critical part of the process.
On one hand, drying temperature and conditions must remain compatible with the manufacturer's instructions so that the garment is not unnecessarily exposed to heat or other conditions that may affect the textile or its ESD properties.
On the other hand, the garment must be completely dry before it is packed.
Residual moisture inside a garment that is subsequently sealed in a plastic bag and stored — whether in a warehouse, locker system or automated garment-distribution machine — may create conditions for unpleasant odor, microbial growth and, in severe cases, mold.
A damp garment that remains packed for an extended period can become a much larger operational problem if it eventually reaches a controlled production area.
For this reason, the end of a drying cycle is not by itself the objective.
The objective is to ensure that the garment is sufficiently dry before it proceeds to sorting and packing.
The principle is therefore two-sided:
protect the garment from unsuitable drying conditions while also ensuring complete drying before enclosed storage.
6. Sorting and Packing
After processing, garments are prepared for return according to the customer's agreed workflow.
Options can be defined for:
-
sorting by size
-
sorting by garment type
-
sorting by department
-
grouped packing
-
individual packing
-
identification according to customer requirements
-
preparation for garment-distribution systems
-
separation of exceptional or damaged garments
Where an industrial customer uses an automated garment-distribution system, the return format can be designed around the practical requirements of that system.
The purpose is to reduce additional handling at the customer's facility and make the clean-garment return process as straightforward as possible.
ESD Garments and Electrical Performance
An important distinction must be made between laundering a static-control garment and verifying its electrical performance.
Standards such as IEC 61340-4-9 and ANSI/ESD STM2.1 define methods for measuring the electrical resistance of static-control garments.
These tests can be used to evaluate garments that contain conductive or dissipative materials and, depending on garment type, may include measurements of garment resistance and personnel grounding paths.
Laundry alone is not an electrical certification test.
If a customer's ESD control program requires periodic verification of garment performance after a defined number of laundering cycles, the factory should specify:
-
the required test method
-
acceptance limits
-
test frequency
-
responsible testing party
-
garment rejection criteria
-
documentation requirements
These requirements can then be incorporated into the overall garment-management program.
Maayan Laundry does not represent ordinary laundering as an electrical performance certification unless a separate testing arrangement has explicitly been defined.
ESD Garments Are Part of a Larger ESD Control Program
An ESD garment does not operate in isolation.
Within an EPA, static-control clothing may function together with other controls such as:
-
ESD flooring
-
footwear
-
grounding systems
-
wrist straps
-
work surfaces
-
packaging
-
ionization
-
environmental controls
-
personnel procedures
The correct garment and its maintenance should therefore be considered as one element within the customer's broader ESD control system.
For this reason, the customer's ESD coordinator or QA team remains an important part of defining what is required from the garment laundry service.
Cleanroom Garment Laundry Service in Israel
Maayan Laundry also provides laundry services for reusable garments used in cleanrooms and other controlled environments.
These may include:
-
cleanroom coats
-
reusable coveralls
-
reusable shoe covers
-
specialized workwear
-
controlled-environment garments
-
reusable textile items defined by the customer
As with ESD garments, the service begins with the garment specification and the requirements of the facility.
Cleanroom Laundry Is Not the Same as Ordinary Laundry
Garments used in controlled environments may be exposed to:
-
particles
-
dust
-
body-generated contamination
-
production residues
-
process-related contamination
-
repeated handling during normal use
The concern is therefore not limited to visible stains or odor.
For a factory, the relevant question is:
Can the garment be processed and returned through a consistent, controlled service workflow that matches the site's requirements?
The laundry service should therefore address:
-
defined garment types
-
repeatable processing
-
care instructions
-
sorting
-
complete drying
-
handling after laundering
-
packing requirements
-
scheduled supply
-
exceptional garments
-
customer QA instructions
Cleanroom Garments and ISO 14644
The ISO 14644 family of standards addresses cleanrooms and associated controlled environments.
ISO 14644-1 relates to classification of air cleanliness by particle concentration, while other parts of the ISO 14644 family address additional aspects of cleanroom operation, cleaning, surfaces and suitability of materials.
This distinction is important.
A laundry service should not claim that ordinary garment washing is itself "ISO 14644 certified" merely because the garments are used inside a cleanroom.
The customer's cleanroom classification, process requirements, garment specification and QA procedures determine what level of garment processing is required.
At Maayan Laundry, we therefore ask customers to define the requirements relevant to their facility rather than applying a generic "ISO wash" label to every garment.
If a customer requires a specialized validated cleanroom-decontamination process, sterile processing or another specifically certified operation, that requirement must be identified before service begins so that suitability can be evaluated.
What Is the Difference Between an ESD Garment and a Cleanroom Garment?
The two terms are related but they are not interchangeable.
ESD Garment
An ESD or static-control garment is designed to assist in controlling electrostatic charge and/or electric fields as part of an ESD control program.
Cleanroom Garment
A cleanroom garment is selected for use in a controlled environment where particle or contamination control is important.
ESD Cleanroom Garment
Some manufacturing environments require garments that address both requirements simultaneously.
For example, electronics manufacturing may require particle-sensitive production together with electrostatic control.
When the same garment serves both purposes, the laundry specification must take both sets of requirements into account.
This is one reason why we prefer to review the actual garment specification before setting up recurring service.
Laundry Programs Built Around the Customer's QA Requirements
There is no single laundry specification that is correct for every factory.
A medical-device manufacturer, electronics plant and precision-production facility may use completely different garments and operate under different internal procedures.
A service specification may therefore include:
-
approved garment list
-
manufacturer care instructions
-
washing parameters
-
drying limitations
-
ESD restrictions
-
cleanroom-related handling requirements
-
sorting method
-
stain-management rules
-
rejection criteria
-
packing method
-
weekly quantities
-
turnaround expectations
-
collection and delivery schedule
The purpose of defining these requirements before routine service begins is to create a process that is repeatable.
For QA and operations teams, repeatability is more valuable than improvisation.
Scheduled Industrial Laundry Service
For a factory using hundreds of garments, the main question is not simply whether the laundry can clean them.
The larger operational question is:
Can the service continuously return enough correctly processed garments for production to continue without disruption?
A recurring service cycle can be organized so that, on the agreed service day:
-
clean garments from the previous cycle are returned;
-
used garments are collected;
-
garments are counted and sorted;
-
the agreed laundering and drying process is performed;
-
garments are sorted and packed;
-
the next delivery is prepared.
This creates a predictable rotation between clean stock, garments in use and garments being processed.
Decades of Recurring Industrial Laundry Experience
Maayan's experience with recurring industrial laundry programs did not begin recently.
For approximately 20 years, we provided a large cable manufacturer in Northern Israel with a fixed weekly garment-laundry service covering approximately 250 work garments per cycle.
The service included:
-
scheduled weekly collection and return
-
garment counting and control
-
sorting by individual employee
-
laundering according to the agreed process
-
preparation of the garments for the following work cycle
-
consistent weekly logistics over many years
For another medical manufacturing company in Northern Israel, Maayan operates a dedicated weekly program averaging approximately 200 reusable garments per week.
This customer's garments are handled according to a fixed sequence of operations approved by the customer's QA team.
For a detailed look at this active program, including the weekly workflow, QA considerations, exception handling and operational structure, read our ESD Cleanroom Laundry Case Study for Medical Manufacturing.
The program includes:
-
a dedicated processing area for the customer's garments
-
equipment allocated specifically to that customer's process
-
defined laundering materials
-
an agreed operating procedure
-
scheduled weekly processing
-
controlled preparation for return
-
a repeatable collection and delivery cycle
The objective is not simply to wash garments.
The objective is to reproduce the same agreed process week after week, while maintaining operational continuity for the customer's production environment.
Maintaining Service Under Exceptional Conditions
During the war period, garment demand in these industrial programs increased sharply.
Frequent movement into protected areas and changes in working conditions increased garment usage, and at peak periods the required service volume grew by as much as three times the normal level.
Maayan continued operating throughout the period and maintained the required collection, processing and return cycles while volumes increased.
This ability to absorb sudden changes in demand is an important part of industrial laundry service: the process must continue to work not only under normal conditions, but also when the customer's operating environment changes unexpectedly.
Long-Term Recurring Service Is Part of Our Operating Model
The same operational discipline extends beyond industrial garments.
Over nearly three decades, Maayan has provided recurring textile and laundry services to a broad range of organizations and communities in Northern Israel, including:
-
long-term weekly service for kibbutzim and community organizations
-
recurring institutional laundry programs
-
service for regional cultural and public institutions
-
ongoing textile-care relationships maintained over many years
Across its history, Maayan has worked with close to 100 kibbutzim and community organizations, many through recurring service relationships.
Some individual customer relationships have continued for close to 20 years.
For a factory evaluating Maayan today, this history matters for a simple reason:
a recurring laundry contract is not a one-time cleaning job. It is a logistics and operational commitment that must continue working every week.
That is why, before starting a new ESD or controlled-production garment program, we define:
-
garment specification
-
weekly quantities
-
laundering requirements
-
QA requirements
-
sorting method
-
packing method
-
collection and return schedule
-
exception handling
-
responsibility points
A new factory can begin with a defined pilot or backup-supplier arrangement, evaluate the actual process and service reliability, and only then decide whether to expand into a full recurring program.
For a detailed example of how Maayan has managed recurring industrial garment programs over many years: Read our industrial garment laundry case study.
Industrial Garment Logistics
Laundry logistics can be adapted according to:
-
factory location
-
weekly volume
-
number of garment types
-
number of sizes
-
frequency required
-
available garment stock
-
packaging requirements
-
internal distribution system
Collection and delivery schedules are agreed individually with each industrial customer.
For suitable volumes, a fixed weekly service route can create a much simpler process for both the factory and the laundry.
Individual Packing and Garment Distribution
Some manufacturing facilities distribute clean garments manually.
Others use lockers, vending systems or automated garment-distribution machines.
Where required, the service can be configured around a specific return format, including:
-
individual garment packing
-
sorting by size
-
grouping by garment type
-
preparation for loading into the customer's distribution system
-
other predefined identification methods
The workflow should be defined before service begins so that garments arrive in a format compatible with the customer's internal process.
Pilot Program Before Full Implementation
Changing an industrial garment laundry supplier can affect production, QA, logistics and employees.
For this reason, a pilot program can be useful before a complete transition.
A pilot can include a defined number of garments and an agreed evaluation period.
Before the pilot begins, the parties can define:
-
garment models
-
quantities
-
laundering instructions
-
stain-treatment rules
-
drying requirements
-
packing method
-
collection schedule
-
return schedule
-
exceptional-item handling
-
customer inspection points
-
QA feedback
At the end of the pilot, the workflow can be reviewed and adjusted before moving to regular service.
This reduces uncertainty and allows the factory to evaluate the actual process rather than selecting a supplier based only on a quotation.
Pilot Program Before Full Implementation
For Operations, Procurement and QA teams evaluating a supplier before or during a pilot: ESD Laundry Supplier Qualification & QA Checklist
Who Is This Service Designed For?
Maayan's industrial garment laundry service may be relevant for:
-
electronics manufacturers
-
SMT production facilities
-
PCB and electronic assembly operations
-
medical-device manufacturers
-
precision manufacturing
-
industrial laboratories
-
controlled production environments
-
factories operating EPA areas
-
organizations using reusable ESD garments
-
organizations using reusable cleanroom garments
-
industrial facilities requiring recurring workwear laundry programs
Suitability is evaluated according to the garments and actual process requirements rather than company sector alone.
What We Need to Prepare a Laundry Proposal
To evaluate a new ESD or cleanroom garment laundry program, please provide as much of the following information as possible:
-
Garment type
ESD coat, cleanroom coat, coverall, shoe cover or other item. -
Garment manufacturer/model
When available. -
Care instructions
A photograph of the care label can often provide useful initial information. -
Weekly quantity
Approximate number of garments per service cycle. -
Service frequency
Weekly, multiple times per week or another cycle. -
ESD requirements
If the garments form part of an ESD control program. -
Cleanroom requirements
Including relevant customer QA instructions. -
Sorting requirements
By size, department, employee group or garment type. -
Packing requirements
Bulk, grouped or individually packed. -
Stain-treatment requirements
-
Factory location
-
Current workflow
Including how clean garments are distributed to employees.
With these details, we can determine whether the service is suitable and build a clearer operational proposal.
Frequently Asked Questions
Do you provide ESD garment laundry services in Israel?
Yes. Maayan Laundry provides laundry services for reusable ESD and anti-static garments for industrial customers, subject to review of the garment specification and customer requirements.
Can an ESD coat be washed like ordinary workwear?
Not automatically.
ESD garments may contain conductive or dissipative materials and should be processed according to the manufacturer's care instructions and the customer's ESD requirements.
Do you wash anti-static garments?
Yes, where the garment specification and required process are compatible with the service.
We recommend reviewing the garment label or manufacturer documentation before beginning recurring service.
Do you provide laundry services for electronics factories?
Yes. The service is particularly relevant to electronics, SMT, medical-device and precision-manufacturing environments using reusable ESD or controlled-environment garments.
Can you wash ESD cleanroom garments?
Potentially, yes.
Where a garment has both ESD and cleanroom requirements, both must be considered when defining the service.
The customer's QA requirements and garment specification should be supplied before service begins.
Does laundering certify that an ESD garment is electrically compliant?
No.
Laundering and electrical verification are different activities.
IEC 61340-4-9 and ANSI/ESD STM2.1 provide test methods for electrical resistance characterization of static-control garments.
If periodic electrical testing is required, the customer should define the test method, frequency and acceptance criteria as part of its ESD control program.
Do you use one fixed wash temperature for all ESD garments?
No.
Different garments can have different permitted washing temperatures and care requirements.
The process should be selected according to the manufacturer's instructions and customer specification.
Why is complete drying important before packing?
A garment that is packed while residual moisture remains may develop odor or microbial growth during enclosed storage.
This is particularly important where garments remain sealed in plastic bags or wait inside a garment-distribution system before use.
At the same time, drying conditions must remain compatible with the garment specification.
The objective is therefore complete drying without unnecessary exposure to unsuitable conditions.
Can garments be individually packed?
Yes, when individual packing forms part of the service specification.
Packing and sorting requirements should be agreed before routine service begins.
Can garments be sorted by size?
Yes.
Depending on the service program, clean garments can be sorted according to size, garment type or another agreed system.
Can you treat stains on ESD garments?
Stain treatment can be evaluated separately.
Because some stronger chemical treatments may be unsuitable for certain ESD textiles, the treatment should remain compatible with the manufacturer's instructions.
Do you provide collection and delivery?
Collection and return service can be arranged for industrial customers according to location, volume and agreed service frequency.
Can we establish a fixed weekly laundry cycle?
Yes.
Recurring industrial customers can establish a regular collection and return cycle according to quantities, garment stock and operational requirements.
Can we start with a pilot?
Yes.
For a new customer, new garment model or transition from another supplier, a pilot can be defined before full implementation.
This allows the customer to evaluate laundering, drying, packing, logistics and QA requirements with a controlled quantity of garments.
Do you provide sterile garment processing?
The service described on this page should not be interpreted as sterile processing or sterilization.
If your process requires sterilization, a validated sterile-laundry process or a specific cleanroom laundry classification, please identify this requirement before requesting service so that suitability can be evaluated.
Are you ISO 14644 certified?
ISO 14644 is a family of standards concerning cleanrooms and associated controlled environments.
We do not describe ordinary garment laundering as "ISO 14644 certified" merely because garments are intended for a cleanroom.
The customer's cleanroom classification, garment specification and QA requirements must be reviewed to determine the required process.
Ready to Evaluate Maayan as an ESD Laundry Supplier or Backup Provider?
If your facility uses reusable ESD garments, anti-static workwear or controlled-environment garments, you do not need to move the entire program at once.
We can begin by reviewing the existing garment specification and operating requirements and, where appropriate, define a limited pilot or backup-supplier arrangement.
Send Us:
-
garment type or model
-
approximate weekly quantity
-
factory location
-
current collection frequency
-
sorting and packing requirements
-
manufacturer care instructions, if available
-
relevant QA or ESD requirements
We will review the information and determine whether Maayan can support the required service cycle.
If there is a fit, the next step can be a defined pilot covering the garments, laundering process, logistics, sorting, packing and evaluation criteria.
The objective is not simply to quote a price. It is to determine whether we can build a reliable recurring process for your factory.
Start With a Service-Fit Review
Phone: 1-700-70-10-50
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
Maayan – Professional Textile Care Since 1997
Related Industrial Laundry Services
Industrial Laundry Services for Factories in Northern Israel
Workwear Laundry Services for Factories
